Amana 49560 Carbide Tipped Table Edge -Thumbnail & Bead 11/64 x 1-3/32 R x

Description

Originally designed for easing and profiling the edges of tabletops, these bits also are widely used for the same purpose on handrails. Optional 3/8" bearing #47702 (order separately). Amana 49560 Carbide Tipped Table Edge -Thumbnail & Bead 11/64 x 1-3/32 R x 2-9/16 D x 3/4 CH x 1/2" Shank w/ Lower BB Ro Cuts a shallow ogee into the tabletop surface coupled with a bead at the edge. Bit will produce a fillet if set to cut deep enough. With the optional 3/8" bearing, it will produce a fillet at the cut's edge. Good choice for handrails. These special router bits are used for cutting table top edges or used with handrail side profile bits. Originally designed for easing and profiling the edges of tabletops, these bits also are widely used for the same purpose on handrails. See also handrail patterns. Eliminate hard edges, reduce the visual thickness of a tabletop, and add an elegant detail simultaneously with these bits. Optional 3/8" bearing #47702 (order separately). Bit will produce a fillet if set to cut deep enough. Maximum RPM 16,000. See also handrail patterns. Good choice for handrails. Eliminate hard edges, reduce the visual thickness of a tabletop, and add an elegant detail simultaneously with these bits. With the optional 3/8" bearing, it will produce a fillet at the cut's edge. These special router bits are used for cutting table top edges or used with handrail side profile bits.

Key Features

• Bit will produce a fillet if set to cut deep enough.
• These special router bits are used for cutting table top edges or used with handrail side profile bits.
• Eliminate hard edges, reduce the visual thickness of a tabletop, and add an elegant detail simultaneously with these bits.
• Originally designed for easing and profiling the edges of tabletops, these bits also are widely used for the same purpose on handrails.
• Amana 49560 Carbide Tipped Table Edge -Thumbnail & Bead 11/64 x 1-3/32 R x 2-9/16 D x 3/4 CH x 1/2" Shank w/ Lower BB Ro Cuts a shallow ogee into the tabletop surface coupled with a bead at the edge.
• With the optional 3/8" bearing, it will produce a fillet at the cut's edge.