Asmc Industrial 1/2 x 1 1/2 Fender Washer Stainless Steel 316

Description

PRODUCT SPECIFICATIONS Part #: 0000-199427 Fastener Type: Fender Washer Size Description: 1/2 x 1 1/2 Diameter/Nominal Size: 1/2* Inside Diameter: 0.531" Outside Diameter: 1.500" Thickness: 0.051-0.080" System of Measurement: Inch. Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc. Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the. Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the washer. Buy as few as 500 pcs. Actual inside diameter is almost always larger than stated size. PRODUCT SPECIFICATIONS Part #: 0000-199427 Fastener Type: Fender Washer Size Description: 1/2 x 1 1/2 Diameter/Nominal Size: 1/2* Inside Diameter: 0.531" Outside Diameter: 1.500" Thickness: 0.051-0.080" System of Measurement: Inch Material: Stainless Steel. *Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit). Discounts on larger quantities. Part #: 0000-199427.

Key Features

• Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc.
• *Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit).
• Part #: 0000-199427.
• Actual inside diameter is almost always larger than stated size.
• PRODUCT SPECIFICATIONS Part #: 0000-199427 Fastener Type: Fender Washer Size Description: 1/2 x 1 1/2 Diameter/Nominal Size: 1/2* Inside Diameter: 0.531" Outside Diameter: 1.500" Thickness: 0.051-0.080" System of Measurement: Inch.
• Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the.