Grey Man Tactical 9.25 x 17 Rigid Molle Panel Black GMT-RMP-09

Description

You can loop a velcro one wrap, Velcro Cinch Strap, Web Dominator, or Grimloc through the internal MOLLE webbing of the backpack and secure the panel to the pack using one of those methods. Product Specifications Width: 9.25" (234.95mm) Height: 17" (431.8mm) Thickness: 0.188" (4.77mm) Material: High Strength Polyethylene Weight: 10.75 ounces (304.76 grams) Backpack Compatibility The 9.25in x 17in RMP Backpack Insert fits: - 5.11 Tactical Rush 12. Product Specifications Width: 9.25" (234.95mm) Height: 17" (431.8mm) Thickness: 0.188" (4.77mm) Material: High Strength Polyethylene Weight: 10.75 ounces (304.76 grams) Backpack Compatibility The 9.25in x 17in RMP Backpack Insert fits: - 5.11 Tactical Rush 12 Main Compartment- 5.11 Tactical MOAB 10. Peel the backing off the adhesive backed velcro tape and place the hook section onto the panel. For any backpack without internal MOLLE webbing: Hydration Bladder Loop - Secure the panel at the top of the internal main pocket by using a hydration bladder loop if available. Product Specifications Width: 9.25" (234.95mm) Height: 17" (431.8mm) Thickness: 0.188" (4.77mm) Material: High Strength Polyethylene Weight: 10.75 ounces (304.76 grams) Backpack Compatibility The 9.25in x 17in RMP Backpack Insert fits. Press firmly int. Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond. Use Velcro one wrap or Grimloc.

Key Features

• Product Specifications Width: 9.25" (234.95mm) Height: 17" (431.8mm) Thickness: 0.188" (4.77mm) Material: High Strength Polyethylene Weight: 10.75 ounces (304.76 grams) Backpack Compatibility The 9.25in x 17in RMP Backpack Insert fits.
• Use a chicago screw to secure the panel to the grommet.
• Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place.
• Grommet / Chicago - Punch a hole in the fabric and secure a grommet to prevent ripping.
• Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact. - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to.